UVP125
(150-500mm | 6-20″)
UVP125
(150-500mm | 6-20″)
The UVP125 packer is made for rapid renovation from inside pipes made of concrete, steel, reinforced concrete, fibre cement, cast iron or PVC. longer damages can be rehabilitated by overlapping patches.
The Ultra Violet LED light-train has a low power consumption and is suitable for pipes of differing diameters from 150 to 500mm (6-20”) by easily exchanging the end-discs and bladders of the packer.
The UVP125 had a forward facing camera with LED ring and a variety of sensors inside to monitor the air pressure and curing temperature inside the bladder. And to measure the inflation and deformation inside the bladder.
The UV-packer can be used as an equipment module for the R125 crawler, or as stand-alone to be used with a cable, push robs or a suitable CCTV crawler.
Pre-impregnated fibreglass liner on a roll
The UV-cured FIBALITE material is light curing glass reinforced polyester (G.R.P.), manufactured in a sheet form comprising a matrix of polyester resin, E-type glass reinforcement, special inert fillers and photoinitiator, sandwiched between two thin nylon protection films. The upper film, which is permeable for UV-light, stays during the application (with the exception of the overlap). Extra advantage is the very low emission of styrene and glass fibre particles during storage, transport and application.
The material is available in two thickness options: 1.5mm or 2.0mm. It can be installed either as a single layer with a thickness of 1.5mm or 2.0mm, or as a double layer stack with a maximum thickness of 3mm or 4mm.
Pan & tilt camera
The front-placed Pan & Tilt CCTV camera provides excellent vision to overview the installation process and to post inspect the freshly rehabilitated pipe immediately after the patching is completed.
The UVP125 packer is made for rapid renovation from inside pipes made of concrete, steel, reinforced concrete, fibre cement, cast iron or PVC. longer damages can be rehabilitated by overlapping patches.
The Ultra Violet LED light-train has a low power consumption and is suitable for pipes of differing diameters from 150 to 500mm (6-20”) by easily exchanging the end-discs and bladders of the packer.
The UVP125 had a forward facing camera with LED ring and a variety of sensors inside to monitor the air pressure and curing temperature inside the bladder. And to measure the inflation and deformation inside the bladder.
The UV-packer can be used as an equipment module for the R125 crawler, or as stand-alone to be used with a cable, push robs or a suitable CCTV crawler.
Pre-impregnated fibreglass liner on a roll
The UV-cured FIBALITE material is light curing glass reinforced polyester (G.R.P.), manufactured in a sheet form comprising a matrix of polyester resin, E-type glass reinforcement, special inert fillers and photoinitiator, sandwiched between two thin nylon protection films. The upper film, which is permeable for UV-light, stays during the application (with the exception of the overlap). Extra advantage is the very low emission of styrene and glass fibre particles during storage, transport and application.
The material is available in two thickness options: 1.5mm or 2.0mm. It can be installed either as a single layer with a thickness of 1.5mm or 2.0mm, or as a double layer stack with a maximum thickness of 3mm or 4mm.
Pan & tilt camera
The front-placed Pan & Tilt CCTV camera provides excellent vision to overview the installation process and to post inspect the freshly rehabilitated pipe immediately after the patching is completed.
The UVP125 had a forward facing camera with LED ring and a variety of sensors inside to monitor the air pressure and curing temperature inside the bladder. And to measure the inflation and deformation inside the bladder.
The UV-packer can be used as an equipment module for the R125 crawler, or as stand-alone to be used with a cable, push robs or a suitable CCTV crawler.
Pre-impregnated fibreglass liner on a roll
The UV-cured FIBALITE material is light curing glass reinforced polyester (G.R.P.), manufactured in a sheet form comprising a matrix of polyester resin, E-type glass reinforcement, special inert fillers and photoinitiator, sandwiched between two thin nylon protection films. The upper film, which is permeable for UV-light, stays during the application (with the exception of the overlap). Extra advantage is the very low emission of styrene and glass fibre particles during storage, transport and application.
Reinforcement : E-glass fibres (±70%)
Resin : UV curing ISO Polyester
Adhesion properties : >10 MPa (to steel, shot blast) (ASTM D4541)
Adhesive modulus : 3,8 GPa (ISO 527-2)
Thickness : 1,5/ 2,0/ 3,0 / 4,0mm
Adhesive tensile strength : ≥ 90MPa (ISO 527-2)
Flexural strenght : 20,486psi (ASTM D790)
Flexural modulus : 1,451,692psi (ASTM D790)
Roll length : 10m (33’)
Roll width (Patch lenght) : 600mm (24”)
Shipping dimensions : 750x260x270mm (29.5×10.2×10.6”)
Shipping weight : 20kg (44LBS)
Reinforcement : E-glass fibres (±70%)
Resin : UV curing ISO Polyester
Adhesion properties : >10 MPa (to steel, shot blast) (ASTM D4541)
Adhesive modulus : 3,8 GPa (ISO 527-2)
Thickness : 1,5/ 2,0/ 3,0 / 4,0mm
Adhesive tensile strength : ≥ 90MPa (ISO 527-2)
Flexural strenght : 20,486psi (ASTM D790)
Flexural modulus : 1,451,692psi (ASTM D790)
Roll length : 10m (33’)
Roll width (Patch lenght) : 600mm (24”)
Shipping dimensions : 750x260x270mm (29.5×10.2×10.6”)
Shipping weight : 20kg (44LBS)
The UV- cured liner material is supplied on 600mm (24”) wide rolls. The roll is placed in the dispenser, which is designed to easily cut the liner at the right size, remove the protection film and load it on the packer by a single person in 3 minutes.
Scope of use
Curing time
Power
Max. pressure
Renovation lengths
Data logging
: 150 – 400mm (6-16”)
: 6 – 10 Minutes
: 100-230V, 50-60Hz
: 2,5bar (360psi)
: 600mm (24”)
: 900mm (36”)
: 1200mm (48”)
: Custom length
: Air pressure
: Deformation
: Curing temperature
Scope of use
Curing time
Power
Max. pressure
Renovation lengths
Data logging
: 150 – 500mm (6-20”)
: 6 – 10 Minutes
: 100-230V, 50-60Hz
: 2,5bar (36psi)
: 600mm (24”)
: 900mm (36”)
: 1200mm (48”)
: Custom length
: Air pressure
: Deformation
: Curing temperature
Thank you for your online demonstration request.
Your preferred date and time will soon be reviewed and login to the online meeting shared. We are looking forward to meeting you.
Best regards,
Sewer Robotics
info@sewerrobotics.com
+3174 289475
+1 503 504 8474
Here you will find our most recent news articles
We are present at various international events and even host our own
